Flange adapters - for mounting breather dryers on existing bolt circles.
Simple screw-on solution
No modifications to the system required
Perfect for breather installation on hydraulics
BUY ONLINE HOW IT WORKS INSTALLATION TECHNICAL DATA FAQ DOWNLOADS
Assembly made easy.
Hydraulic power units and mobile hydraulics usually already have pre-drilled bolt circles on the hydraulic tank that are perfect for installing an adsorber. This is where flange adapters come into play—they connect system and adsorber.
How it works.
Flange adapters fit perfectly on standard bolt circles with 73 mm and have a 1"f thread on the top into which a breather dryer can be screwed.
Installation of a flange adapter.
Step 1: Flange adapter
Screw the flange adapter onto the existing bolt circle on your hydraulic tank. A gasket is included - screws must be purchased separately.
Step 2: Breather dryer
Screw on the adsorber. Please make sure to order your breather dryer with a matching 1"m adapter.
Technical data.
 |
|
|---|---|
| FLANGE ADAPTER | LK73 PA |
| WEIGHT (KG) |
0.04 |
| HEIGHT (MM) |
27 |
| DIAMETER (MM) |
85 |
| CONNECTION | 1"f |
|
|
|---|---|
| FLANGE ADAPTER | LK73 PA |
| WEIGHT (KG) |
0.04 |
| HEIGHT (MM) |
27 |
| DIAMETER (MM) |
85 |
| CONNECTION | 1"f |